View Single Post
Old 05-13-2010, 05:24 PM   #3
westofb
I really hate wet sanding!
 
westofb's Avatar
 
Join Date: Dec 2008
Location: Brookfield, MO
Posts: 601
Re: Alignment Problems...any ideas?

Quote:
Originally Posted by lolife99 View Post
Got any pics of your suspension?
Did the truck have any prior frame damage?
No I don't have any pics of the suspension, I could get them, but looks like another suspension that I have seen. No there is no damage to the truck what so ever. I would not went to the trouble of doing the swap to 1/2 ton, except the truck was in awesome shape, CA truck, no rust, 65K actual miles, 454/ th400 silverado. The suspension is basically half ton now, the only difference is the upper control arms, the studs that go through the cross shaft are much larger than 1/2 ton ones, so I stayed with the 3/4 ton arms and changed ball joints to half ton, which bolted directly in place of the 3/4 ton ones. Just trying to figure out how to make it drive a bit better, it is okay as is, but could stand improvement.
__________________
Jeff,

68 C-10
75 C-20, now a C-10!
10 F-150
westofb is offline   Reply With Quote