The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Calipers will not fit on drop spindles...

harnalien · 05-13-2010, 10:52 PM

I had this problem but it resolved itself after some driving. There is going to be some contact between the pad and rotor regardless. However getting the calipers to recess will help a lot.

05-13-2010, 10:52 PM	#6
harnalien TruckincrazY Join Date: May 2004 Location: Haslet, TX Posts: 493	Re: Calipers will not fit on drop spindles... I had this problem but it resolved itself after some driving. There is going to be some contact between the pad and rotor regardless. However getting the calipers to recess will help a lot.