[JohnC]

Originally Posted by PureLuck88

I put the window rubber on glass then rap small gauge rope in the channel over lapping the rope afew inch's at bottom then tape the rope to glass (inside truck side) spray little wd-40 or soap water like if you were doing window tint. one person on outside of glass in the bed of truck holding glass against window opening .one person inside of truck with a small skrew driver (not the drink)to aid in the install the one inside starts pulling slowly one part of the rope at a time a cuple of inch's then stops then go's to the other peice of rope pulls it alittle at the same time the person outside truck pushes that part of window to help set it.keep going back and forth on each rope

Great info man!