Replumbed the fuel cell... Went from -8 to -6 bulkhead...had to make a couple of aluminum washers to fill the 3/4" hole in the fuel cell.
Also started making some fuel line brackets out of aluminum flat stock. They hold 2 3/8" aluminum fuel lines from the notch back to the fuel cell. Then the ones in front of the notch will be 2 3/8" fuel lines and a 3/16" brake line.
Originally saw how to build these on the HAMB forums...but someone has a write up here in the FAQ.
Pics later
Kinda hard to get the 3/8" holes right in center of the 2 pieces of aluminum. But they will work fine. The long bracket needs to get cut down. It was the first one...trying to get the spacing right.
