The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

prostreetC-10 · 05-21-2010, 01:21 AM

I would guess a little over 400hp. It's got a lot of bark but not that much bite. It fools a lot of people. Granted......I know how to drive a 4 speed so I can put on a show. It's just a little comp 280/.520 lift. It breathes well and I don't want it any quicker. It's really just my cruising "shop truck".

The 67 fastback in my signature will be the real power. Will be a full roller 331 or 347 with AFR 185 outlaw heads. In a 2900 lbs car....she's gunna scoot!

Curious.....what heads are you running? Is that 1030 Holley a 4150 platform carb? Just curious where the cfm is coming from? I've got a couple of 1000 holley 4150s and they usually are not too good on the street due to the size of the venturis. That's a big hole to cover in the lower rpms.

05-21-2010, 01:21 AM	#13
prostreetC-10 My Carbon Footprint Join Date: Oct 2008 Location: Orygun Posts: 5,527	Re: Make my truck hook!! I would guess a little over 400hp. It's got a lot of bark but not that much bite. It fools a lot of people. Granted......I know how to drive a 4 speed so I can put on a show. It's just a little comp 280/.520 lift. It breathes well and I don't want it any quicker. It's really just my cruising "shop truck". The 67 fastback in my signature will be the real power. Will be a full roller 331 or 347 with AFR 185 outlaw heads. In a 2900 lbs car....she's gunna scoot! Curious.....what heads are you running? Is that 1030 Holley a 4150 platform carb? Just curious where the cfm is coming from? I've got a couple of 1000 holley 4150s and they usually are not too good on the street due to the size of the venturis. That's a big hole to cover in the lower rpms. __________________ A quick "pedalfest" *Still getting loose (carb test)* 496 Initial fire up video! Last edited by prostreetC-10; 05-21-2010 at 01:23 AM.