The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

jessewebb · 05-21-2010, 08:03 PM

Hi, I have a 69 C/10 it has a 72, 12bolt 307 rearend. I want to change the ring and pinion to a 373. My question is, Do I need to change anything else. I seen a 373 0n ebay, but the guy says if you have a 307 carrier it wont work. i also need a 373 carrier. Any help would be appreaciated. Also I'm not deadset on the 373, I could use alil advise on the rearend size also. I have a 350 with a 350 auto, it's just dead on take off. around 60 or 70 when i punch it, it does very well. it sounds like a beast, but i need 15 mile straight to wound it out.

05-21-2010, 08:03 PM	#1
jessewebb Registered User Join Date: May 2010 Location: beckley, WV. Posts: 823	changing ring and pinion Hi, I have a 69 C/10 it has a 72, 12bolt 307 rearend. I want to change the ring and pinion to a 373. My question is, Do I need to change anything else. I seen a 373 0n ebay, but the guy says if you have a 307 carrier it wont work. i also need a 373 carrier. Any help would be appreaciated. Also I'm not deadset on the 373, I could use alil advise on the rearend size also. I have a 350 with a 350 auto, it's just dead on take off. around 60 or 70 when i punch it, it does very well. it sounds like a beast, but i need 15 mile straight to wound it out.