|
Actually you are not looking for a screw in pivot ball if you are building a 2wd and are putting the small back in the correct v-8 position. The screw in is for 4x4's. You need one that sits on a flat plate bracket that bolts to the 2 bosses in the engine block designed for the cluch pivot ball. In addition, the bracket for the z-bar on the frame is different from the I6 as is the z-bar and clutch rod. Basically you need the entire setup from clutch to fork off a small block standard truck. Again, the big assumption is correct v8 position and 2wd.
I don't have part #'s but your best bet is to find another member who is parting such a beast.
__________________
Currently on or near the homestead:
67 Chevy SWB 2WD stepside 350/3 on tree (Pat's)
67 GMC SWB 2WD Fleet 402/auto (Brian's under construction)
67 Chevy 3/4 ton 2WD 402/auto (Business Hauler)
67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC)
68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC)
70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC)
71 Chevy SWB stepside (Crushed by tree - parts donor)
72 Chevy 3/4 ton 4WD (Parts donor)
72 Chevy 3/4 ton 4WD Suburban (Parts Donor)
72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC)
81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler)
82 Camaro Z/28 355/Super T-10 (Pat's toy)
93 Caprice 9C1 (Brian's Cop Car)
02 Toyota Camry (Reliable but a souless steel and plastic hulk)
2011 2SS RS Camaro M6 Factory Hurst Shifter 
Maybe I need to sell some of this crap 
Yet another Bozo with a sawz-all
|