[elwoods76]

Ok so I got the 95 springs in but didn't put the axle saddles in correctly. Well correct for the flip but with the different springs I needed to compensate by installing the saddle with the hole facing the rear. Before reversing the saddle the axle was not centered in the wheel well. After flipping it around it brought the axle forward centering it in the wheel well. Now all i have to do is take the springs out of the front and cut off another half a coil as there is only a 1/2 a coil cut off stock springs. I am just looking to lose one more inch by doing that. If I can just do that I will happy with the stance. Thanks for all the help and special shout out to Trav for all the help!