Re: TH350 & NP203 to NP205?
Just did it this past winter
Truck was a 1977 k10 Short bed. THERE IS NO NEED TO MOVE THE TRANSMISSION CORSSMember If using a th350!! in a truck that had a th350!
You need to lengthen the rear drive shaft and get a shorter front shaft. On the front shaft you can get a drrive shaft out of a truck optioned with a sm465np205 witch is the shortest shaft out there and get a longer slip yoke. I have the part number if needed. Or you can cut down the np203 front drive shaft. You will also need the 4 bolts to attach the adapter to the transmission in which the top two need to be longer then the bottom two. I would also do new mounts.
Also double check that both use 27 spline? input and out put shafts. There are a few odd balls with 30splines?
__________________
1984 chevy c10, built 400sb,.(SOLD )
77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363
1956 Willys Wagon (327 chevy) Project (Now Buick 225)
1980 Corvette L-48 4 speed
1992 Mustang GT built 5.0 5 speed

1985 C10 LWB Sold
1982 K10 SWB plow truck Parted out
1986 D30 M1028 fire brush truck Parted out
Last edited by 84 400; 06-11-2010 at 08:37 PM.
|