The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

f.monroe · 06-23-2010, 10:26 PM

If you remove the trans lines from the radiator no water will come out ,even without plugs . I would plug them just to keep dirt and such out . Installing the pilot bushing is as easy as just tapping it in place . Just be sure to check that it fits the input shaft of the trans before installing it .
Frank

06-23-2010, 10:26 PM	#8
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: Pilot Bushing in 350 crank If you remove the trans lines from the radiator no water will come out ,even without plugs . I would plug them just to keep dirt and such out . Installing the pilot bushing is as easy as just tapping it in place . Just be sure to check that it fits the input shaft of the trans before installing it . Frank __________________ Born and proudly residing in a Red State ! Last edited by f.monroe; 06-23-2010 at 10:27 PM.