Re: front clip removal
the bumper isn't hooked to the front clip.
2 fenders, fenderwells, core support and grill, and the hood with hinges.
Its been a while since I've done this... bit I think there's the nuts under the core support to the frame, 1 bolt in the upper rear of each fenderwell, 1 or two bolts per side in the lower rear fender, and then after removing the cowl, there's one or two bolts per side in there.
Then under hood, rad hoses, trans cooler lines (if an automatic) battery cables, and unplug the harness from the firewall.
I think thats it
|