The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

cobra1966 · 06-25-2010, 01:46 PM

JunkyardJohn

I would not hold my breath that someone will shelf the small springs and bolts required to keep the linkage arm in place. As a matter of fact, anything and everything is being reproduced. I just like to use the right parts instead of going to a hardware store to search if I dont have to. I know alot of C10 owners who prefer a aftermarket Tachometer to the Factory One and install it on the instrument panel by custom fitting it. I chose to ask who carries the parts and take it from there respectfully.

06-25-2010, 01:46 PM	#7
cobra1966 Registered User Join Date: May 2009 Location: FT POLK, La Posts: 75	Re: Transmission Linkage Arm JunkyardJohn I would not hold my breath that someone will shelf the small springs and bolts required to keep the linkage arm in place. As a matter of fact, anything and everything is being reproduced. I just like to use the right parts instead of going to a hardware store to search if I dont have to. I know alot of C10 owners who prefer a aftermarket Tachometer to the Factory One and install it on the instrument panel by custom fitting it. I chose to ask who carries the parts and take it from there respectfully. Last edited by cobra1966; 06-25-2010 at 01:48 PM.