The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

treeboy97 · 06-27-2010, 02:36 PM

Hello, I have been doing the research and now it's time for a few questions.
I have a stock 1970 C10 with drum brakes. I have been looking at the kits from GMC Pauls and CPP.

I already have drop springs from CPP for the front and back 3" in front 4" in back.

I want to start my conversion in July and have saved enough to do what I want.

Out of those two vendors, in your opinion, which has the better kit?

Can I use the stock front springs and just use a drop spindle instead?

What incidentals will I more than likely need for my disk upgrade?

I have learned allot in the last few months reading here and appreciate what you have to say.

Thanks

06-27-2010, 02:36 PM	#1
treeboy97 Registered User Join Date: May 2009 Location: Waynesville, Ohio Posts: 136	My front disk brake options Hello, I have been doing the research and now it's time for a few questions. I have a stock 1970 C10 with drum brakes. I have been looking at the kits from GMC Pauls and CPP. I already have drop springs from CPP for the front and back 3" in front 4" in back. I want to start my conversion in July and have saved enough to do what I want. Out of those two vendors, in your opinion, which has the better kit? Can I use the stock front springs and just use a drop spindle instead? What incidentals will I more than likely need for my disk upgrade? I have learned allot in the last few months reading here and appreciate what you have to say. Thanks __________________ 1970 C10 LWB (Grandfather's Truck) 5.3 4L60E 2012 Victory Cross Country Touring I'm not wasting money on my truck/bike, I'm helping to rescue the economy one mod at a time.