The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Blue68 · 05-27-2003, 11:29 PM

You may want to take a look at these then. Got to the bottom of the page. It kind of depends on your heads, headers and bolt holes available.

http://www.made4uproducts.com/centerbolt_kits.htm

Update...Mine are R & M Specialties. Don't know if they exist anymore or not, but I got them from Sallee-Chevrolet. Similar ones can be seen on this page, just scroll down a bit to see a good pic. There are a lot of big photos so be patient.

http://www.sallee-chevrolet.com/Chev...remepics2.html

And the other kind can be seen here

http://www.sallee-chevrolet.com/Photos/zz430pics.html

05-27-2003, 11:29 PM	#9
Blue68 Registered User Join Date: Apr 2000 Location: Frisco, Tx, USA Posts: 606	You may want to take a look at these then. Got to the bottom of the page. It kind of depends on your heads, headers and bolt holes available. http://www.made4uproducts.com/centerbolt_kits.htm Update...Mine are R & M Specialties. Don't know if they exist anymore or not, but I got them from Sallee-Chevrolet. Similar ones can be seen on this page, just scroll down a bit to see a good pic. There are a lot of big photos so be patient. http://www.sallee-chevrolet.com/Chev...remepics2.html And the other kind can be seen here http://www.sallee-chevrolet.com/Photos/zz430pics.html __________________ http://home.comcast.net/~r.landrum/w...tos.html-.html '68 C-10 LWB, '98 Z-71 350 w/accessories (Serpentine), Edelbrock Performer, Edelbrock 1405 (600cfm) carb, GM HEI, CompCam Extreme 4x4 roller cam, Thorley Headers, Carter Electric Fuel Pump, Vintage Air, 700r4, 3.73, disc brakes and power steering upgrades. Last edited by Blue68; 05-27-2003 at 11:38 PM.