The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

72Levi · 06-29-2010, 07:51 PM

I did not want to install aftermarket door switches, one option I did not have was the factory switches. I just wired it into the existing orange and white wires that go to the top light. It is the inside light connected to the harness on the side of the single wall top. I simply spliced it to the driver side bottom corner orange/white wire. To turn them on all I have to do is turn my headlight switch to the left and I have light.

06-29-2010, 07:51 PM	#6
72Levi Active Member Join Date: Feb 2006 Location: sa tx Posts: 851	Re: Let there be light! Under dash lights I did not want to install aftermarket door switches, one option I did not have was the factory switches. I just wired it into the existing orange and white wires that go to the top light. It is the inside light connected to the harness on the side of the single wall top. I simply spliced it to the driver side bottom corner orange/white wire. To turn them on all I have to do is turn my headlight switch to the left and I have light. __________________ 1972 K5 Blazer ALL ORIGINAL paint & engine, A/C, Tilt, 4sp, AM/FM, Tow Hooks, Aux Battery Tray, Tach, Vacuum 2004 FORD FX4 SuperCrew 2005 CTS-V 12 sec family car 2008 Buick Enclave AWD, Nav, & DVD, Wife LOVES it!