The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - so she's back sitting in the garage again.

RandyP · 06-30-2010, 09:17 PM

I am by no means mechanically inclined. I've never torn in to an engine, never done much besides swap a radiator or condenser and put a starter on. But, back in the late 80's I did rebuild a quadrajunk, and it was not all that hard. All in all though, to be honest, even after rebuilding it I ended up with a new edelbrock.

Can you really get close to a fuel injection setup for $250? I know to go to a TBI you're looking at wiring and computer, plus the in tank fuel pump setup. Of course that is a factory TBI setup, not familiar with aftermarket FI setups.

06-30-2010, 09:17 PM	#3
RandyP Getting Old; Going Broke Join Date: Apr 2010 Location: Owasso OK Posts: 2,764	Re: so she's back sitting in the garage again. I am by no means mechanically inclined. I've never torn in to an engine, never done much besides swap a radiator or condenser and put a starter on. But, back in the late 80's I did rebuild a quadrajunk, and it was not all that hard. All in all though, to be honest, even after rebuilding it I ended up with a new edelbrock. Can you really get close to a fuel injection setup for $250? I know to go to a TBI you're looking at wiring and computer, plus the in tank fuel pump setup. Of course that is a factory TBI setup, not familiar with aftermarket FI setups.