The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Mike C · 07-13-2010, 09:43 PM

In my 70 longbed GMC I had a set of 4 1/2" separates installed in the door panels, not the kick panels. I had a kicker 4x50 bridged 2x50 1x100. The amp was mounted to the floor under the middle of the seat. I put a 10" low profile box underneath the passenger side of the seat. I used an infinite baffle design if you will meaning I left the back of the "box" open just sitting on the floor. Sounded great. If memory serves, the sub was a Kicker Comp Free Air 10 and the separates were Kicker as well.

07-13-2010, 09:43 PM	#4
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,740	Re: stereo help In my 70 longbed GMC I had a set of 4 1/2" separates installed in the door panels, not the kick panels. I had a kicker 4x50 bridged 2x50 1x100. The amp was mounted to the floor under the middle of the seat. I put a 10" low profile box underneath the passenger side of the seat. I used an infinite baffle design if you will meaning I left the back of the "box" open just sitting on the floor. Sounded great. If memory serves, the sub was a Kicker Comp Free Air 10 and the separates were Kicker as well. __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax