|
Re: installing step notch (i need some pointers)
Quote:
Originally Posted by laid_out_70
alright man, ill play with some 3/16 plate. and it doesnt have to be the strongest because the frame wont be supporting anything at or past the notch. and fyi flux core burns hotter then with gas.
|
That is not the best way to approach building a vehicle.
It needs to be as strong or stronger than original. Do you weld for a living (or did you @ one time and/or were certified)? I'm not saying it can't be done w/a 110 machine..... I would just make sure everything is perfect & that my design approach was overkill to start with.
I'm curious to see how the pro's will weigh in on using the 110 to get it done.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG
Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....
Cubic inches is like Indiana Jones with a cheap pistol.
|