|
I just did all 4 of mine. I'd say 4 hrs tops start to finish (tires off to on). Definetly only take one apart at a time. And lay the items in an orderly manor on the ground and try to reinstall opposite of removing. To me it's always been easier to remove the two springs holding the shoes to the backing blate first then the adjuster and spring first than remove one shoe and put a new one on then remove the other shoe and put the new one on then install the adjuster etc.....
__________________
1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs
1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX
1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears
1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now.....
1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone.
1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed.
1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm 
|