The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

*78 Chevyrado* · 07-23-2010, 09:14 AM

When I lifted mine I switched to 1 Ton Front coils, MOOG PN#6454 And used a 1.5" lift block kit for the rear. My truck originally had the HD rear Springs and LD front springs... If you have LD rear springs, you'll probably need a 2" lift block. Just hunt up a 1.5" lift kit for a 4x4. Mine came from Rocky Mountain suspension.

For Reference, There's 3 springs available: The LD 3/4 ton spring, which is the HD 1/2 ton coil. The HD 3/4 spring which is also the 1-ton LD spring, and there's a HD 1 ton spring. The MOOG 6454 is the 3/4 ton HD and 1 ton LD spring. Got about 1.5" lift from it.

07-23-2010, 09:14 AM	#9
78 Chevyrado Account Suspended Join Date: Dec 2007 Location: Unnapreciative, Trollville Posts: 2,079	Re: Need help lifting 2wd C20 a little When I lifted mine I switched to 1 Ton Front coils, MOOG PN#6454 And used a 1.5" lift block kit for the rear. My truck originally had the HD rear Springs and LD front springs... If you have LD rear springs, you'll probably need a 2" lift block. Just hunt up a 1.5" lift kit for a 4x4. Mine came from Rocky Mountain suspension. For Reference, There's 3 springs available: The LD 3/4 ton spring, which is the HD 1/2 ton coil. The HD 3/4 spring which is also the 1-ton LD spring, and there's a HD 1 ton spring. The MOOG 6454 is the 3/4 ton HD and 1 ton LD spring. Got about 1.5" lift from it.