The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Before exterior pics, 1 After interior...

reds_racing · 07-28-2010, 06:18 PM

72BLCKButy can you measure from the center of the spindle to the top of fender well for me. I am at 14 1/2 inches and ece tells me I am lower than a 4" inch should be. They think maybe I got a 2" spring packaged in the wrong box. It is way lower than I expected it to be. I like it, I just don't want alignment issues and such. If I am at where your 4.5 is, I am ok with that. They will send me a new set of springs, but I don't really want to pull it all back apart all over again. I am an lower than your after measurements in you build thread as well. I should be a half inch higher I would think.

07-28-2010, 06:18 PM	#12
reds_racing Registered User Join Date: Apr 2010 Location: Dallas, TX Posts: 94	Re: Before exterior pics, 1 After interior... 72BLCKButy can you measure from the center of the spindle to the top of fender well for me. I am at 14 1/2 inches and ece tells me I am lower than a 4" inch should be. They think maybe I got a 2" spring packaged in the wrong box. It is way lower than I expected it to be. I like it, I just don't want alignment issues and such. If I am at where your 4.5 is, I am ok with that. They will send me a new set of springs, but I don't really want to pull it all back apart all over again. I am an lower than your after measurements in you build thread as well. I should be a half inch higher I would think.