|
4/6 static question
I am in the middle of dropping and converting my C20 to a C10. I custom fabricated all the brackets on a Lincoln 9" rear to mate up to the custom trailing arms that I am also in the middle of building.
My question is what is the distance from the bottom of the frame rail to the top of the axle? I can fab a frame notch if I need to but I have heard that I might not need one. True? Knowing the distance from frame to axle will help me map out the placement of the coil over shocks and pan hard bar.
So anyone who has a 4/6 drop a quick measurement is all I need.
Thanks
Mike
|