The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

geezer#99 · 07-29-2010, 08:27 PM

Some tips. Start at the top and work your way down. Apply the 3m in short lengths like a foot at a time. Put some in the groove and push it on and off a few times. That way you have 3m in the groove and on the lip. Keep pulling and pushing slightly till theres resistance while pulling then hold the rubber on till it holds by itself. It takes a while to stick on good. Make sure its secure before you move on to the next piece. Nice to have a helper but if you work slowly you can do it yourself. The 3m is nasty stuff. That's why they call it black death. Have fun!!!

07-29-2010, 08:27 PM	#4
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,785	Re: Door rubber seal Some tips. Start at the top and work your way down. Apply the 3m in short lengths like a foot at a time. Put some in the groove and push it on and off a few times. That way you have 3m in the groove and on the lip. Keep pulling and pushing slightly till theres resistance while pulling then hold the rubber on till it holds by itself. It takes a while to stick on good. Make sure its secure before you move on to the next piece. Nice to have a helper but if you work slowly you can do it yourself. The 3m is nasty stuff. That's why they call it black death. Have fun!!!