The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - no rpo sticker in glove box...or firewall...how else to get codes? need paint code

RandyP · 08-01-2010, 06:56 PM

Smallest amount is up to them, I'd guess a pint or quart. You do not get anything mixed in with the paint as far as reducer or hardner. It depends on what sort of paint you get (single stage/basecoat clearcoat) on what you'll need.
Once you mix single stage with the reducer and hardner, you have a pot life of a few hours. Basecoat reduced has a long shelf life since it has no hardner/catalyst in it.

08-01-2010, 06:56 PM	#10
RandyP Getting Old; Going Broke Join Date: Apr 2010 Location: Owasso OK Posts: 2,764	Re: no rpo sticker in glove box...or firewall...how else to get codes? need paint cod Smallest amount is up to them, I'd guess a pint or quart. You do not get anything mixed in with the paint as far as reducer or hardner. It depends on what sort of paint you get (single stage/basecoat clearcoat) on what you'll need. Once you mix single stage with the reducer and hardner, you have a pot life of a few hours. Basecoat reduced has a long shelf life since it has no hardner/catalyst in it. __________________ *Why is every used 350 sbc out of a corvette?* There's only two things that excite a man, expensive toys and real expensive toys. *VEGETARIAN: That's an old Indian word meaning "I don't hunt so good."* When the going gets tough, switch to power tools.