The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

doublebeetx · 08-10-2010, 05:12 PM

Quick question . The previous owner of my frame , '65, decided to take out the crossmember. It was halfway done so I had to finish removing the rivets. So, here I am to put it back in. The holes are 7/16. Does your PB use 1/2 bolts to mount the new crossmember and drill the frame? I figure since I have it out,I will also compensate and center the rear wheels. Thanks, don't mean to take over. Awesome work !

08-10-2010, 05:12 PM	#90
doublebeetx Registered User Join Date: Mar 2010 Location: Chandler,Tx Posts: 78	Re: 1963 C10 SWB Big Window Build Quick question . The previous owner of my frame , '65, decided to take out the crossmember. It was halfway done so I had to finish removing the rivets. So, here I am to put it back in. The holes are 7/16. Does your PB use 1/2 bolts to mount the new crossmember and drill the frame? I figure since I have it out,I will also compensate and center the rear wheels. Thanks, don't mean to take over. Awesome work !