The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**NGN** · 08-16-2010, 11:23 PM

A longer speedo cable. Also is it a L6 or V8 ? You'll need the auto linkage from the trans to the steering colume to be for a 6 or 8. I used a 350 auto trans from a V8 2wd 72 Blazer and it's linkage on my 67 L6. Everything fit right but had to find and use a L6 auto linkage , it's longer with a slight ben about six inches at the top from a 68 Chev truck. If you have a V8 well use the auto linkage for that. Also the bracket for the kickdown L6 or V8 is needed.

08-16-2010, 11:23 PM	#8
NGN Registered User Join Date: Nov 2001 Location: Old Bridge,NJ Posts: 840	Re: switching from manual to auto ??? A longer speedo cable. Also is it a L6 or V8 ? You'll need the auto linkage from the trans to the steering colume to be for a 6 or 8. I used a 350 auto trans from a V8 2wd 72 Blazer and it's linkage on my 67 L6. Everything fit right but had to find and use a L6 auto linkage , it's longer with a slight ben about six inches at the top from a 68 Chev truck. If you have a V8 well use the auto linkage for that. Also the bracket for the kickdown L6 or V8 is needed.