The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

71meangreenc10 · 08-23-2010, 09:47 AM

Well,
Finally think I know why I have my vibration @ 55. Took some measurements of the driveline and found my trans is at 4 degrees and the rear pinion is @ 7. There is a shop close to me who is making shims so lets see how this turns out.

Smitty

08-23-2010, 09:47 AM	#1
71meangreenc10 Its a Truck Thing...... Join Date: Dec 2004 Location: Sierra Vista, Arizona Posts: 3,179	Working the pinion angle Well, Finally think I know why I have my vibration @ 55. Took some measurements of the driveline and found my trans is at 4 degrees and the rear pinion is @ 7. There is a shop close to me who is making shims so lets see how this turns out. Smitty __________________ 71 C10 283/3SPD Full Resto 71 GMC 1500 Sierra Grande http://67-72chevytrucks.com/vboard/s...d.php?t=518599 70 C10 Suburban Former military GSA truck. 72 Chevy Blazer 4X4, Sloppy Jo, Mountain Climber. Wife says no more trucks. http://67-72chevytrucks.com/vboard/s...d.php?t=707378 72 GMC 1 Ton Motor Home, wife said no more trucks until she saw this one. Gen 3 6.0/4L80E 4.10 http://67-72chevytrucks.com/vboard/s...d.php?t=761110 68 GMC Suburban was 3/4 ton, now 1/2.Wife shook her head 71 C30 Wrecker 71 C20 Scott-Bilt As weird as it gets..BB Cheyenne AC Truck 68 GMC Long Stepside. They keep following me home 69 C30 Former Motor Home, Flat Bed time 70 G20 Red-E-Kamp Conversion "I'm your Boogy Van"