The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

RandyP · 09-01-2010, 12:34 PM

The standard duty one might fit, just looks like it has extra outlets for some reason, not even sure where they go since I've never owned a big block square. If you were close to me, you could come by and we'd try the standard duct I have that I saved from my 87 1/2 ton. I'd almost bet it would work, but can not be for certain on that.
It shows the air cleaner is the same no matter what motor, so I'd really lean towards it working, and they are available from GM. Just tell them 87 1/2 ton with a 350 and see if they change their mind about it being available or not.

09-01-2010, 12:34 PM	#13
RandyP Getting Old; Going Broke Join Date: Apr 2010 Location: Owasso OK Posts: 2,764	Re: Air Cleaner Intake Hose and Clamps The standard duty one might fit, just looks like it has extra outlets for some reason, not even sure where they go since I've never owned a big block square. If you were close to me, you could come by and we'd try the standard duct I have that I saved from my 87 1/2 ton. I'd almost bet it would work, but can not be for certain on that. It shows the air cleaner is the same no matter what motor, so I'd really lean towards it working, and they are available from GM. Just tell them 87 1/2 ton with a 350 and see if they change their mind about it being available or not. __________________ *Why is every used 350 sbc out of a corvette?* There's only two things that excite a man, expensive toys and real expensive toys. *VEGETARIAN: That's an old Indian word meaning "I don't hunt so good."* When the going gets tough, switch to power tools.