The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

68gmsee · 09-03-2010, 06:18 PM

If it barely moves that means the clutch rod is too long and it's pushing in on the throw out bearing. Bring it back in so that you have no more than 1/2" to 1" of travel at the pedal.

If you can't do that, then clutch disc is installed wrong or defective, pressure plate is defective or throw out bearing is wrong one.

09-03-2010, 06:18 PM	#3
68gmsee Active Member Join Date: Jul 2007 Location: Centrally located between Houston, Austin and Waco. BCS area. Posts: 7,947	Re: New clutch, truck barely moves now, If it barely moves that means the clutch rod is too long and it's pushing in on the throw out bearing. Bring it back in so that you have no more than 1/2" to 1" of travel at the pedal. If you can't do that, then clutch disc is installed wrong or defective, pressure plate is defective or throw out bearing is wrong one.