The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

slugish · 09-13-2010, 11:06 PM

Got 9.5 in rims on the back of mine with 4 in bs'ing & that is as much as Ican go witout rubbing , but mine is lowered . So Iwould recommend 3/3/4 or 4 in bs'ing for a 10 in rim for the rear > should be about flush with the lower fender well without sticking out. As for the front , with 10 in rims , would recommend 5 in bs'ing > should acheive the look you are looking for .

good luck

09-13-2010, 11:06 PM	#5
slugish Slugish Join Date: Jan 2005 Location: Earlysville, Va. Posts: 1,024	Re: what is the proper backspacing on a 10" Got 9.5 in rims on the back of mine with 4 in bs'ing & that is as much as Ican go witout rubbing , but mine is lowered . So Iwould recommend 3/3/4 or 4 in bs'ing for a 10 in rim for the rear > should be about flush with the lower fender well without sticking out. As for the front , with 10 in rims , would recommend 5 in bs'ing > should acheive the look you are looking for . good luck