The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

JimKshortstep4x4 · 06-08-2003, 07:57 PM

A slide hammer usually works well. I have pulled them using a pry bar when the outer race is made out the thin material.

I have never run into a problem removing them from the 12 bolt rear ends which I am assuming you have.

Jim

06-08-2003, 07:57 PM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	A slide hammer usually works well. I have pulled them using a pry bar when the outer race is made out the thin material. I have never run into a problem removing them from the 12 bolt rear ends which I am assuming you have. Jim