The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

raycow · 09-18-2010, 04:41 AM

If your 700 is already set up for a mechanical speedo drive and your stock 60 cable is too short, you can use a cable for a 4WD and it will be more than long enough. A better solution would be to route a piece of stiff wire from the transmission to the speedo, avoiding any sharp bends. Measure the wire and this will tell you the exact cable length you need.

If your 700 is set up for an electric speedo, you will need the mechanical drive conversion parts in addition to the cable.

Ray

09-18-2010, 04:41 AM	#3
raycow Registered User Join Date: Mar 2003 Location: San Francisco, CA USA Posts: 2,454	Re: 700R4 Speedo Cable If your 700 is already set up for a mechanical speedo drive and your stock 60 cable is too short, you can use a cable for a 4WD and it will be more than long enough. A better solution would be to route a piece of stiff wire from the transmission to the speedo, avoiding any sharp bends. Measure the wire and this will tell you the exact cable length you need. If your 700 is set up for an electric speedo, you will need the mechanical drive conversion parts in addition to the cable. Ray Last edited by raycow; 09-18-2010 at 05:06 AM.