The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - GA Parting out 72 c10 ac cab with 68 front clip

srea76 · 09-22-2010, 09:52 PM

hood is in good shape. Surface rust here and there, but no holes. It is off a 68 gmc i parted a while back. I also have the chevy hood which is ok shape, but does have some bondo on it and rust. I would take

250.00 for the tilt.

Works perfect in the truck although the shifter just slides in hole and is not bolted in, not sure if it is wrong shifter or what it was that way when I got the truck. Shifts fine, but you can slide it out if you want to easy.

09-22-2010, 09:52 PM	#4
srea76 Registered User Join Date: Nov 2009 Location: Hazlehurst, Ga. Posts: 822	Re: Parting out 72 c10 ac cab with 68 front clip hood is in good shape. Surface rust here and there, but no holes. It is off a 68 gmc i parted a while back. I also have the chevy hood which is ok shape, but does have some bondo on it and rust. I would take 250.00 for the tilt. Works perfect in the truck although the shifter just slides in hole and is not bolted in, not sure if it is wrong shifter or what it was that way when I got the truck. Shifts fine, but you can slide it out if you want to easy. __________________ 1972 Custom Deluxe LT1 Gen V Swap "Green Lantern" 1984 Silverado Red Baron-72 c10 Project Last edited by srea76; 09-24-2010 at 08:50 AM.