The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

SCOTI · 09-24-2010, 10:15 AM

^^ Yep, that sums it up. Center the rear as much as possible @ ride height. Adjust the bar accordingly & install it. Re-measure, then adjust left or right as necessary by disconnecting the adjustable end of the bar & threading it in or out.

I use a ratchet strap on the frame & suitable location on the rear housing to tug it one way or the other if needed.

09-24-2010, 10:15 AM	#6
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,132	Re: Adjustable track bar?? ^^ Yep, that sums it up. Center the rear as much as possible @ ride height. Adjust the bar accordingly & install it. Re-measure, then adjust left or right as necessary by disconnecting the adjustable end of the bar & threading it in or out. I use a ratchet strap on the frame & suitable location on the rear housing to tug it one way or the other if needed. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*