Quote:
Originally Posted by Shaun23a11en
the blazer was already lowered when i got it. looks like someone cut the springs maybe 1.25 coils off. so today i cut 3/4 of a coil off. it dropped it exactly 1 inch. now, the the of the front fender lip is exactly 25" off the ground. if i recall, that stock measurement should be around 30-32" so very significant drop on the front end. the front springs are about as long as a water bottle now! tires are cooper cobras 255/60/15 front and 275/60/15 rear on 15x10 and 15x8.5 rally
|
That's one good lookin' truck!
This is the stance I'd like to achieve. I've got spindles from my old Blazer and springs, so that should get me as low on the front end. Unfortunately I wasn't able to salvage the shackle kit from that Blazer.
How should/can I go about dropping the rear from stock without flipping the rear axle as I don't want to C it?
Tight truck!