[scottsdaleowner75]

the fabtech upper a-arms corrected the screwed up geometry that the lift springs gave you. also anything you want to bolt to those spindles needs to be for the year that the spindle as made for. the spindle will net you 3-4 inches of lift but be prepared to go through ball joints quickly. even with the corrrect upper arms, springs, and spindle almost all lift companies discontinued this way of lifting because of the issues they had with tearing the front ends up. this is why you see the drop down bracketry on these years now almost exclusively being offered and not the old way of lifted spring/spindle and arms. plus i believe 88-98 had stronger frames than our squares. at least the fronts were boxed
Posted via Mobile Device