The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

vin63 · 10-01-2010, 11:10 AM

I've done this on other vehicles (not a mid-year truck). What I've done in the past was weld up the existing carriage bolt holes, and then mock up the bumper where I wanted to re-position it. I would then mark where the new mount holes will need to be punched or drilled. Sounds like a neat idea. Good luck.

10-01-2010, 11:10 AM	#2
vin63 It's Better With Nitro Join Date: Apr 2008 Location: Chino Hills, CA Posts: 2,262	Re: Lowering front bumper I've done this on other vehicles (not a mid-year truck). What I've done in the past was weld up the existing carriage bolt holes, and then mock up the bumper where I wanted to re-position it. I would then mark where the new mount holes will need to be punched or drilled. Sounds like a neat idea. Good luck. __________________ 1963 C-10: Deluxe-optioned cab, shortbed, fleetside Pontiac 462 ci, Kauffman D-Port alum. heads 4L80E, narrowed sheetmetal Ford 9-inch Tubular front and rear suspension Custom 6-piston front disc and 4-piston rear disc brakes