|
Re: Friends '84 C10 SWB - 22s - 3/3 drop - Spray Bombed
Quote:
Originally Posted by Leedogg
Unless you're working bondo- or trying to get to bare metal- there is NO NEED to put anything less than 220 on your trucks finish. I use 80, then 180, to mechanically strip paint. If I am prepping to paint with a sealer- I'll 220 it, then 400....without a sealer, i'll wetsand with 600 grit. Paint finishes are ALL about the prepwork.
|
True, But there was some deep stuff that wouldnt come off with the 220 had no choice but to go down to bare metal. It feathered out really well cant even tell it was down to bare metal.
Last edited by muthstryker; 10-04-2010 at 01:16 PM.
|