|
Re: ignition switch...bare minimum needed to operate?
In jyards I look at the color of the wires that lead to the starter solenoid and ignition coil and match them to the color wires on the ignition switch plug. Then you will need to break a paper clip in two and jump the main hot (red heavy gauge wire) to the coil wire and then take the other half and put one end in same hot wire and "tap" the other end into the yellow or purple solenoid wire.... You also may have to runa ground jumper from the switch plug to ground as well... its been a while, but it has never failed me yet....
--Mike
__________________
63 C20 2WD, 230/SM420/4.11 73K
68 C30 dump truck, 327,SM425,4.56 66K original
68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes
68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79
69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi...
70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP
72 Chevy K20 4x4 350/350/205/4.56 donor
72 Vette 350/M21/3.70 posi, triple black and super fast
84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's
|