The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

tucsonjwt · 10-04-2010, 05:24 PM

Link is accurate. Make sure you clamp or bolt the arc to the frame before you remove/reinstall the motor. I would go with an AC Delco motor - should be able to buy online for like $25. Just check the connection on the end of the motor before you install it - the last one I installed had a lose connector that caused a bad connection and it took me over a year to track down the problem. I drilled holes in the inside upper door frame and used bent plumbers strap (metal with holes) to hold the window in place when the regulator was removed (the window is all the way up when you remove the regulator).

10-04-2010, 05:24 PM	#4
tucsonjwt Registered User Join Date: Jul 2007 Location: Tucson, AZ Posts: 3,198	Re: Window Motors Link is accurate. Make sure you clamp or bolt the arc to the frame before you remove/reinstall the motor. I would go with an AC Delco motor - should be able to buy online for like $25. Just check the connection on the end of the motor before you install it - the last one I installed had a lose connector that caused a bad connection and it took me over a year to track down the problem. I drilled holes in the inside upper door frame and used bent plumbers strap (metal with holes) to hold the window in place when the regulator was removed (the window is all the way up when you remove the regulator).