The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - lowered control arms instead of spindles ?

Slammed67 · 10-05-2010, 12:37 AM

I have a set of the DJM 4" lower control arms on my 2000 GMC. Not sure I'd go that route again because there is some noticeable bump steer. However, I wanted to keep my stock wheels which wouldn't work with drop spindles and springs. Also, if you end up buying the DJM LCAs, don't buy the matching DJM shocks! They are way too stiff.

10-05-2010, 12:37 AM	#11
Slammed67 Progress = 0% Join Date: Nov 2001 Location: Kansas City, MO Posts: 2,108	Re: lowered control arms instead of spindles ? I have a set of the DJM 4" lower control arms on my 2000 GMC. Not sure I'd go that route again because there is some noticeable bump steer. However, I wanted to keep my stock wheels which wouldn't work with drop spindles and springs. Also, if you end up buying the DJM LCAs, don't buy the matching DJM shocks! They are way too stiff. __________________ Jason - '67 GMC swb \| '57 Bel-Air 4dr hardtop \| '56 210 4dr Wagon \| 2000 GMC Sierra