The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**old Rusty C10** · 10-05-2010, 10:32 AM

you need to measure the tailshaft on your trans and the one on the donor car to make sure they are the same size so the driveshaft will work... the bolt pattern on the bell housing is the same, also you will prolly need to switch over the transmission mount

10-05-2010, 10:32 AM	#5
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,348	Re: 700r4 out of a caprice? you need to measure the tailshaft on your trans and the one on the donor car to make sure they are the same size so the driveshaft will work... the bolt pattern on the bell housing is the same, also you will prolly need to switch over the transmission mount __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!