The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

*Randy70C-10* · 06-11-2003, 07:22 PM

To get bondo "straight", you should first cut it down with some 60 grit paper and a rubber sanding block. You can them finish it off with 180, primer, and wet sand with 400.

06-11-2003, 07:22 PM	#2
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	To get bondo "straight", you should first cut it down with some 60 grit paper and a rubber sanding block. You can them finish it off with 180, primer, and wet sand with 400.