|
Re: Question about drip rail material
Wire brush all the old out, lay down some epoxy primer and flow on the 3m 8307 - do not use anything else! - sand if needed, prime if you like, and spray on your white. That is the only way to do it right... 
__________________
1969 Chevy C10 Custom Camper - "Frame On" Restoration
Blueprint 383 w/ 405hp@5200rpm & 441ft-lbs@4200rpm / Jegs TH350 w/2300 Stall / Drivelines NW 2-Piece Shaft / stock 3.08's / CPP 4" Drop Rear, 3.5" Modular Drop Front
|