The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

kens67chevy · 06-12-2003, 08:41 AM

have one guy pump up the pedal good a have another guy open the bleeder screw while the guy at the pedal is slowly pushing down at a steady pressure. when the pedal man is down have him tell you then close the bleeder. repeat this at each wheel cylinder until you have good pedal pressure and all the air is out.

also watch your master cylinder to make sure is doesn't go dry and you have to redo everything.

06-12-2003, 08:41 AM	#6
kens67chevy Registered User Join Date: May 2003 Location: michigan Posts: 32	brake trouble have one guy pump up the pedal good a have another guy open the bleeder screw while the guy at the pedal is slowly pushing down at a steady pressure. when the pedal man is down have him tell you then close the bleeder. repeat this at each wheel cylinder until you have good pedal pressure and all the air is out. also watch your master cylinder to make sure is doesn't go dry and you have to redo everything.