Re: advice from the 60-66 guys
Do you work there because that was the response I got from them when I had a problem.
The rear caliper set up had too much offset in the bracket and in order to make it work I had to mill off .100 to allow the caliper and pad to go on over the rotor.
The front problem was they claimed I could use the existing calipers off my heavy half 85 front suspension on their spindles and rotors but the reality was I needed to buy a very specific 73 caliper...then I could not use the anti rattle pads becasue like the rears the calipers would not clear the rotor.
I have done this stuff for over 40 years and I realize sometimes there are problems and you need some help phere and there. The people at CPP only wanted to tell me that they never have problems and that I was doing something wrong.
During the whole process I asked if I could return the stuff because it did not fit and the answer was "sure can but it will cost you 20%". Now if thats good service then I am out of line for sure.
Sorry but I tell em like I see em.
Lucifer
|