The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

lts70 · 10-14-2010, 11:22 PM

oldblue1968chevy I have new stainless soft lines. they were the only other items I replaced besides the calipers.

Captainfab I put the little collar sleeves on the inside side of the caliper bolt hole before I bolted her down.

It is so weird, they are not stuck or grabbing. They work like normal except they do not release pressure all of the way off when the brake pedal is released. Where I have ran GM D52 calipers for the last few years with no problem this really has me stumped.

I am really bummed on this one. I want to get the d52's on the back as well but can’t get this front figured out. It seems like the simplest task are getting the best of me these days.

10-14-2010, 11:22 PM	#10
lts70 1970 Daily Driver Join Date: Jun 2007 Location: Glenns Ferry IDAHO Posts: 1,038	Re: Need disc brake help oldblue1968chevy I have new stainless soft lines. they were the only other items I replaced besides the calipers. Captainfab I put the little collar sleeves on the inside side of the caliper bolt hole before I bolted her down. It is so weird, they are not stuck or grabbing. They work like normal except they do not release pressure all of the way off when the brake pedal is released. Where I have ran GM D52 calipers for the last few years with no problem this really has me stumped. I am really bummed on this one. I want to get the d52's on the back as well but can’t get this front figured out. It seems like the simplest task are getting the best of me these days. __________________ It's not truly yours if you didn't build it yourself or if you don't do your own maintenance.