The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - How to lower a 1969 GMC truck ? ( front )

coryalexander · 10-19-2010, 10:06 AM

man changing the spindles is not that hard, you can do it. you have to pretty much take the spindle off anyway to change the springs/cut them . i would lean towards changing spindles and do a little cutting on the springs verse just cutting springs. you will still have alot of suspension travel with the spindles and it would ride better(hell in that case just like it rides now.

and it wont hurt to put disc brakes on it, much better brakes to make sure you are safe.

10-19-2010, 10:06 AM	#6
coryalexander Registered User Join Date: Sep 2010 Location: Tyler,Tx Posts: 25	Re: How to lower a 1969 GMC truck ? ( front ) man changing the spindles is not that hard, you can do it. you have to pretty much take the spindle off anyway to change the springs/cut them . i would lean towards changing spindles and do a little cutting on the springs verse just cutting springs. you will still have alot of suspension travel with the spindles and it would ride better(hell in that case just like it rides now. and it wont hurt to put disc brakes on it, much better brakes to make sure you are safe.