The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Need Some Electrical Advice/ And thoughts on one other thing .

Andy4639 · 10-21-2010, 02:42 PM

The elctric connections you take a small flat blade push in the side that connects to the other connector while doing this push the wire end in and the flat blade presses the keeper in and the connection comes out.
Not easy explaining but simple procedure.

Not the best picture but it's basicley the same. The metal slides into plastic and the metal barb clicks into place not letting it come back out inless you push it up with a small screw driver. Push the wire in a little and then push the screw driver in from oppiste side and it should come out.

10-21-2010, 02:42 PM	#2
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Need Some Electrical Advice/ And thoughts on one other thing . The elctric connections you take a small flat blade push in the side that connects to the other connector while doing this push the wire end in and the flat blade presses the keeper in and the connection comes out. Not easy explaining but simple procedure. Not the best picture but it's basicley the same. The metal slides into plastic and the metal barb clicks into place not letting it come back out inless you push it up with a small screw driver. Push the wire in a little and then push the screw driver in from oppiste side and it should come out. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.