Re: 1990 GMC Suburban ... Cummins Powered
Thanks buddy ! Shop comes in handy and full machine shop does not hurt either . Just set drivershaft angle , thats also related to the cummins engine angle . I was happy with 5 1/2 degrees .
With the lift 8" lift and length of the rear shaft will put me about 15 degrees and that well with in the range of a 1410 u-joint .
Today I was just cleaning up and painting the stick pedal assembly and hydroboost unit . Got the firewall opened up to get ready to cut the hole for the clutch master .
Last edited by greguw; 10-24-2010 at 11:57 AM.
|